Thursday, January 9, 2020

Bucknell University Acceptance Rate, SAT/ACT Scores, GPA

Bucknell University is a private liberal arts college with an acceptance rate of 33%. Located in Lewisburg, Pennsylvania, Bucknell has the feel of a small liberal arts college with the course offerings of a comprehensive university. The engineering program is worth a close look, and the universitys strengths in the liberal arts and sciences have earned it a chapter of the prestigious  Phi Beta Kappa Honor Society. In athletics, the Bucknell University Bisons compete in the NCAA Division I  Patriot League. Popular sports include soccer, field hockey, football, and track and field. Considering applying to Bucknell University? Here are the admissions statistics you should know, including average SAT/ACT scores and GPAs of admitted students. Acceptance Rate During the 2017-18 admissions cycle, Bucknell University had an acceptance rate of 33%. This means that for every 100 students who applied, 33 students were admitted, making Bucknells admissions process competitive. Admissions Statistics (2017-18) Number of Applicants 10,144 Percent Admitted 33% Percent Admitted Who Enrolled (Yield) 29% SAT Scores and Requirements Beginning with the 2019/2020 application cycle, Bucknell will be test optional for most students. During the 2017-18 admissions cycle, 67% of admitted students submitted SAT scores. SAT Range (Admitted Students) Section 25th Percentile 75th Percentile ERW 620 690 Math 630 730 ERW=Evidence-Based Reading and Writing This admissions data tells us that most of Bucknells admitted students fall within the top 20% nationally on the SAT. For the evidence-based reading and writing section, 50% of students admitted to Bucknell scored between 620 and 690, while 25% scored below 620 and 25% scored above 690. On the math section, 50% of admitted students scored between 630 and 730, while 25% scored below 630 and 25% scored above 730. Applicants with a composite SAT score of 1420 or higher will have particularly competitive chances at Bucknell. Requirements Bucknell does not require the SAT writing section. Note that Bucknell participates in the scorechoice program, which means that the admissions office will consider your highest score from each individual section across all SAT test dates. SAT Subject tests are not required, but will be considered if provided. ACT Scores and Requirements Beginning with the 2019/2020 application cycle, Bucknell will be test optional for most students. During the 2017-18 admissions cycle, 43% of admitted students submitted ACT scores. ACT Range (Admitted Students) Section 25th Percentile 75th Percentile English 29 34 Math 27 31 Composite 28 32 This admissions data tells us that most of Bucknells admitted students fall within the top 11% nationally on the ACT. The middle 50% of students admitted to Bucknell received a composite ACT score between 28 and 32, while 25% scored above 32 and 25% scored below 28. Requirements Note that Bucknell does not superscore ACT results; your highest composite ACT score will be considered. Bucknell does not require the ACT writing section. GPA In 2018, the average high school GPA of Bucknells incoming freshmen class was 3.5. This information suggests that most successful applicants to Bucknell have primarily A and B grades Self-Reported GPA/SAT/ACT Graph Bucknell University Applicants Self-Reported GPA/SAT/ACT Graph. Data courtesy of Cappex. The admissions data in the graph is self-reported by applicants to Bucknell University. GPAs are unweighted. Find out how you compare to accepted students, see the real-time graph, and calculate your chances of getting in  with a free Cappex account. Admissions Chances Bucknell University has a competitive admissions pool with a low acceptance rate and high average SAT/ACT scores. However, Bucknell has a  holistic admissions  process involving other factors beyond your grades and test scores. A strong application essay and glowing letters of recommendation can strengthen your application, as can participation in meaningful extracurricular activities and a rigorous course schedule. Bucknell also requires several  supplemental essays. Applicants should make sure to use these essays to convey your unique qualities and interests. Students with particularly compelling stories or achievements can still receive serious consideration even if their grades and test scores are outside of Bucknells average range. Students applying to Bucknell must apply to one of three colleges: The College of Arts Sciences, the College of Engineering, or the Freeman College of Management. All applicants must have two years of a single foreign language and at least two and a half years of college preparatory math. In the scattergram above, the blue and green dots represent accepted students. You can see that the majority of successful applicants had high school grades in the A range, combined SAT scores of 1250 or higher (ERWM), and ACT composite scores of 27 or better. If You Like Bucknell University, You May Also Like These Schools: Colgate UniversityBoston CollegeJohns Hopkins UniversityUniversity of RichmondPrinceton UniversityDuke UniversityDartmouth CollegeTufts UniversityPennsylvania State UniversityUniversity of VirginiaDrexel University All admissions data has been sourced from the National Center for Education Statistics and Bucknell University Undergraduate Admissions Office.

Wednesday, January 1, 2020

The Boston Tea Party Political and Mercantile Protest - Free Essay Example

Sample details Pages: 2 Words: 635 Downloads: 2 Date added: 2019/08/16 Category History Essay Level High school Tags: Boston Tea Party Essay Did you like this example? There were several different events that I considered discussing during the studied time frame, but the major historical event that most intrigued me the most is the Boston Tea Party. The Boston Tea Party was a political and mercantile protest led by the Sons of Liberty in Boston, Massachusetts on December 16, 1773. The Boston Tea Party was a result of the Tea Act that was put into place by the British Government. Don’t waste time! Our writers will create an original "The Boston Tea Party: Political and Mercantile Protest" essay for you Create order The Tea Act was granted by the British to help reduce their national debt therefore, placing a tax on the tea in Boston. As a show of protest against the British Parliaments new tax on their tea, the citizens in Boston dumped crates of tea in the harbor of Boston. Their chant of No taxation without representation became famous and influenced politics moving forward. The Boston Tea Party happened as a result of Taxation without Representation, yet there are many more complex causes that led up to this Tea Party protest. However, when looking at the history of our great United States of America and the world of protesting that we live in today, this act is what makes this such a significant event and signifies one of the first massive rebellions and the beginning of several fundamental rights that our current democracy allows. The American Colonist believed that Britain was unfairly taxing them for their tea. One main reason they are taxing American Colonists is to help fund the French and Indian War. The colonist had never accepted the increased taxation or liked the constitution and the Tea Act rekindled their opposition to British government. Their resistance resulted in the Boston Tea Party on December 16, 1773, in which the colonists dressed as Native Americans, boarded East Indian Company ships and dumped all the tea on the ships overboard i n the harbor. Furthermore, the belief that the Government was creating a monopoly on tea created a sense of both anger and fear amongst those living in The States. The American Colonist argued that a monopoly created with tea would allow for other businesses and their products to also be monopolized and would hurt the economy in which competitive pricing was beginning to be established It takes just a few simple acts by government to create stir amongst groups that are considered the rebels prior to war. The Boston Tea Party, written by Samantha Gibson, explained how Samual Adams joined voices with the Sons of Liberty to begin the crucial steps towards the beginning of the Revolutionary War against England and eventually the creation of the United States of America. The British then became very furious at the actions of the colonists and felt a need to impose discipline for their rebellion. The act of discipline enforced by the British Government is written and explained by the authors of History.com, which became known as a key part of the Intolerable Acts. The American Colonist then became, highly upset about the punishment that the British enforced upon the colonists. How and why does this become so important? It seems very clear to me as I continued the research of the the event and the current state of uncertainty in our very own country. War does not look to be in our near future, but it is clear that the ability of a few to come together over a cause can create protest for their rights and has rooted itself in our country over the years, and is protected rights through the constitution. Over the last several months and years, it seems that the right to protest and express ones views has increased and thus supports the statement made by John Adams in his diary dated December 17, 1773 in which he states that The people should never rise, without doing something to be remembered/something notable and striking.

Tuesday, December 24, 2019

What Types Of Design Features Improve Readability Of...

What types of design features improve the readability of documents? First, I will address this from the perspective of a math teacher. For students who struggle with math, simply increasing the font size, leaving more white space around each problem, and placing fewer problems on the page make the problems seem easier to solve. Using a less formal font family, such as Comic Sans MS, or a font that appears shorter and wider rather than thin and stretched vertically, also has a positive effect. While Comic Sans MS is not recommended for many professional business documents, it is preferable in this context. As evidence, consider the following homework samples. Which appears, at first glance, the least difficult to solve? Which appears the most challenging? Does one seem more like an unusual, foreign concept? Which one seems the most impersonal? In your opinion, which one seems like it is written by the most caring teacher? Does one sample seem designed for a younger, less exper ienced audience? Keep in mind, all four samples start with identical equations! Clearly, the visual aspects of the problems can influence how the reader feels about attempting the assignment. I assure you, if I use the last sample, students are much more likely to feel confident they know how to get started solving the equations! Second, I will discuss positive features of my church’s Sunday bulletin. The bulletins are sheets of paper with a simple, low-resolution color photo on one side,Show MoreRelatedA Report On The Communication Phase Essay1695 Words   |  7 Pagesonto implementing the system and be guaranteed that our implementation would meet the requirements as long as we followed our design documents and the requirements stayed consistent with our original brief. As we had determined at the early stages of the project, it was unlikely that the requirements would be volatile. Because of this we felt confident that our design document would assure we followed the requirements during implementation. To certify this, continuous testing was done throughout implementationRead MoreExplain The Following Principles Of Software Design2690 Words   |  11 Pagessoftware design. Task 1 (P5) Define and describe: †¢ software development life cycle – activity and purpose of each stage †¢ software structures such as functions, procedures, classes and objects †¢ software design concepts such as modularity, readability, reliability, portability and maintainability. Task 2 (M1) Discuss the importance of the quality of code in terms of modularity, reliability, usability, portability and maintainability. Task 3 (D1) Discuss the factors that can improve the readabilityRead MoreEssay on Website Usability Analysis of Samsung.com3915 Words   |  16 Pagesessentially answers the question â€Å"Does it do what users need?† This may seem like a simple question to answer, but how it is answered by web site developers is crucial to the life of the web site and its offerings. Because of the vastness of the internet, competition between websites is fierce. If people cannot find what they are looking for on one site they will simply leave and visit another site. The first law of e-commerce is that people cannot buy what they cannot find. This paper will analyzeRead MoreWhat Are Professional Writing?1583 Words   |  7 Pages1. What is professional writing? Answer: Professional writing is the composition of informative materials designed for those who work in a professional capacity. This career also involves creating explanatory documents and articles, as well as sales materials for use in technical fields. Producing documentation and educational materials for use in the medical field is another activity within professional writing. Both general news coverage and business news reporting are also considered to be withinRead MoreBusiness Communication4956 Words   |  20 Pagescommunication process model is designed to assist with basic communication processes. The intent is to help improve what the sender is trying to communicate to the audience. To be a successful communicator one must have a clear idea of what is being suggested. The follow up from the audience will provide positive or negative feedback, which allows the sender to evaluate the effectiveness of what was interpreted by the audience. The communication process is a great tool if used correctly. UnfortunatelyRead MoreLibrary Management System2581 Words   |  11 Pagesas well as some professional sectors too like, Advocacy etc. The efficiency of a library lies in the fact how it is arranged and how easily one can get the books of their choice. Generally, what we see nowadays is the manual library management system whose process of operation is very much hectic. What we are doing is that we are proposing a computerised library management system, which would provide better and efficient service to the library members. Brief outline of the application:- Read MoreBsbrsk5018752 Words   |  36 Pages The following table summarises the types of evidence students can generate as proof of competence. The table contains information based on the AQF (Australian Qualifications Framework) Level for the unit BSBRSK501A: Manage risk. Sample assessment tools have been suggested as a means of assisting students in generating the appropriate form of evidence for this unit. AQF Level Distinguishing Features (Source: AQF Implementation Handbook 2007: Guidelines) Type of evidence to be used Sample assessmentRead MoreApplication Of Software Quality Management2060 Words   |  9 Pagesparameters helps to prepare Test Management Plan. Benchmarking: The proposed product standards can be decided using the existing performance benchmarks of similar products that already exist in the market. Design of Experiments: Using statistics we determine what factors influence the Quality or features of the end product Cost of Quality: This includes all the costs needed to achieve the required Quality levels. It includes prevention costs, appraisal costs and failure costs. Other tools: There areRead MoreDeveloping Visual Identity Package For O2gen Solutions6496 Words   |  26 Pagespresence. With the manual set, the social media content ready and the website in its development phase we moved on to brochure. All our activities were inter related. Creating a rough outline for brochure and separate page designs was final step in the brochure activity. Designs were created in different sizes even for mobile devices. The complete designing process was done using Adobe softwares and Microsoft Publisher. â€Æ' Acknowledgements I would like to thank Ms. Shaheena Zareen who has been theRead MoreAnimal Shelter Solutions18259 Words   |  74 PagesDatabase Design Supplemental Project Book Instructor Version Oracle Academy Database Design i Copyright  © 2009, Oracle. All rights reserved. Contents INTRODUCTION IV How to Use this Project Book iv Project Difficulty iv PROJECT 1: DJS ON DEMAND 1 1.1. Introduction 1 1.2. Case Study 1 1.3. Steps, Exercises, and Examples 3 1.4. Solutions 9 PROJECT 2: GLOBAL FAST FOODS 15 2.1. Introduction 15 2.2. Case

Sunday, December 15, 2019

Service Industry vs Manufacturing Industry in the UK Free Essays

string(95) " shown in various indicators with the shift to more service-oriented sector taking prominence\." The market in which organisations find themselves is continually changing. On the other hand, trade and investments are growing rapidly and overtaking the world output and there is increasing integration of the world economy. Multilateralism is constantly threatening and regionalism is stronger in Europe, Asia and America than ever before. We will write a custom essay sample on Service Industry vs Manufacturing Industry in the UK or any similar topic only for you Order Now This continuous structural change in world economies indicates the variations in the relative size of each sector which can be seen in terms of changes in output, employment and productivity. ECONOMY STRUCTURES Economies can be divided into three categories: Primary, Secondary and Tertiary. The primary economy includes all activities related to the extraction of natural resources e. g. mining, farming etc. The secondary economy includes activities related to the production of goods and processing of materials which have manufacturing as its major component. It also includes the construction sector and utilities sector. The tertiary sector includes both the private and public services such financial industry, health, defence and other services related sectors. http://tutor2u. net/business/gcse/external_environment_economic_sectors. tm accessed on 31st November 2009. MANUFACTURING INDUSTRY IN BRITAIN Industry is defined as a group of firms producing similar products with boundary of an industry determined by a gap in the chain of substitutes. All sectors of the economy can be referred to as an industry but emphasis lay with the secondary sector which is widely regarded as the manufacturing se ctor. Roger Cox (2009) Concerns have been raised over the competitiveness and continued decline of Britain’s manufacturing base. This de-industrialisation has continually raised questions whether it can seriously damage the country’s wealth. The concerns about manufacturing have been reflected in trends in various statistical indicators especially the shift away from manufacturing towards services, the productivity gap between Britain and its major international competitors. Malcolm Sawyer (2009) clearly stated that the value of manufacturing output in Britain has continued to rise slowly in the last half century, but the share of manufacturing in the total output is what has declined not the absolute amount. DE-INDUSTRIALISATION IN BRITAIN The trade balance in manufactured goods moved into deficit in 1983 for the first time since the Industrial revolution of the early 90’s. This could be attributed to the gradual movement of the economy from manufacturing to more service-oriented economies. This experience is not unique to Britain alone, over the period 1970 to 1990, the share of manufacturing in the national output declined in all major industrial nations while that of services increased. By 1990, the share of manufacturing in the GDP among major economies had declined with Britain coming sixth behind Japan, Germany, USA, and France. Mark C. Corri F. (1998) De-industrialisation can be viewed in a number of ways: ?The decline in employment, in both absolute and relative terms. The decline in the share of national output contributed by the sector. ?The decline in the country’s share of world manufacturing output or exports. ? The failure due to poor export performance or increased import penetration to generate sufficient export to finance a full employment level of imports. Office for National Statistics ONS figures for the last quarter of 2008 shows a decline of 10. 4% lower than the figures from the previous year with output decreasing in 12 out of 13 sub-sectors. Significant decreases were recorded in the metal industries, transport industries and in machinery and equipments industries 11. 4%, 10. % and 9. 8% respectively. http://www. fundstrategy. co. uk/news/british-manufacturing-slumps/182454. article accessed 25th of November 2009. In Britain, the fall in the demand for labour is associated with a reduction in output until 1987 and probably a rise in the wage level relative to the price of other factors. The decline in manufacturing employment means that its share of total employment has also declined over that period of time with employment in the service industry sector growing at a faster rate. A growth rate of over 7% was recorded in the 1980’s in the service sector with manufacturing falling by over 20%. Shares of world trade in manufactures and deindustrialisation. (%) 195019601970197919901991 France9. 99. 68. 710. 59. 710 Germany7. 319. 319. 820. 920. 220 Japan3. 46. 911. 713. 715. 917 UK25. 516. 510. 89. 18. 69 USA27. 321. 618. 616. 016. 018 Office for National Statistics (1991), Monthly review of External Trade statistics. London Manufacturing’s problems began with the misguided notion that Britain should become a â€Å"post-industrial† economy: that we would focus on services and the creation of ideas, with other nations taking on the less attractive task of making the finished product. The results speak for themselves. Manufacturing now generates just 13% of GDP, compared with 32% in 1970. John Rose, http://web. ebscohost. com/ehost/detail? vid=3hid=11sid=81119b4e-a750-4e4f-8fdc-3d2366c3f5e4@sessionmgr12bdata=JnNpdGU9ZWhvc3QtbGl2ZQ%3d%3d#db=bthAN=35824528 accessed on 22 November 2009. In the period 1980 to 2000, the manufacturing base in Britain was on a steady decline. Government argued that the reducing contribution made by the manufacturing towards GDP will be made up for by the service industry but further researches shows that the assumption was misjudged. Figures show deficits on goods moving from +? 1. 3 billion to -? 30. 4 billion creating a ? 31. 7 billion deficit not covered by the service industry. This Industrial decline was accelerated by increased competition from cheaper imports and the outsourcing to low cost economies which saw a free fall in different high profile companies closing down, downsizing or relocating to low cost economies. http://web. ebscohost. com/ehost/detail? vid=3hid=11sid=81119b4e-a750-4e4f-8fdc-3d2366c3f5e4@sessionmgr12bdata=JnNpdGU9ZWhvc3QtbGl2ZQ%3d%3d#db=bthAN=35457939 accessed on 26th November 2009. John S Mark S (2004) clearly states that the deindustrialisation in Britain has not being affecting the whole of the manufacturing sector, certain sectors mainly instruments and electrical engineering industries has witnessed a tremendous rise in production and they are among the fastest growing in the economy but industries like the metal industries have witnessed a substantial decline in their productivity. EMPLOYMENT FIGURES WITHIN THE INDUSTRIES This sector underwent a significant growth in the early 80’s in the EU during the post industrial phase of economic development. The doubts about manufacturing sector have been shown in various indicators with the shift to more service-oriented sector taking prominence. You read "Service Industry vs Manufacturing Industry in the UK" in category "Papers" It has been argued that the decline in Britain’s manufacturing sector should not be a cause for concern but rather the offset of expansion of other sectors of the economy especially the Service industry. The service sector witnessed a rapid increase in employment with the financial sector gaining rapidly on the manufacturing sector. In 1971, the workforce in the manufacturing industry has shrunk by around 4 million with the service industry recording a growth of around 3. million. By 1994, while about 46 million people where employed in the manufacturing sector, about 55 million and 28 million people where employed in the private and public services sector respectively representing about 64% of the total employment figure within the EU. Andrew Taylor of financial times reported that over a century beginning from the first production in 1907 to 2007, the manufacturing sector employment figures has fallen from 7 million to 3 million while women not account to 23% compared to the 25% at the onset. The mining sector used to account for about three-quarters of the employment with figures about 837,000 but now employs around 10,000 accounting for just around 1% of the employment figures. The aerospace industry, a section of the service industry which was non-existent at the beginning of the century now employs about 100,000. Mark C. Corri F. (1998) http://web. ebscohost. com/ehost/pdf? vid=5hid=9sid=537cf987-eae7-4a54-a771-43527c9111f7@sessionmgr10 accessed 1st December 2009. SERVICE SECTOR GROWTH IN BRITAIN In the post industrialisation era in EU, economies including the UK witness a boom in the service sector with significant growth in the financial services sector and the aerospace industries. Between 1979 and 1993, there was a rise from 7 to 13 percentages in service sector employment rate. In more recent surveys, the services industry across banking to airliners has shown growth rates in February that represent a five month high, as companies have raised their prices. This is a positive sign that suggests that the predicted slowdown as espoused by the Bank of England has yet to materialize. The Chartered Institute of Purchasing and Supply revealed that index prices are up by 1. 5 percent since September 2007 whilst the report also indicated that the economy has maintained its current momentum. http://www. investmentmarkets. co. uk/20080305-1705. html accessed on 23rd of November, 2009. The measurement of service industry depends on the way it is defined, either value or volume wise. Outsourcing has been a major component in promoting service sector. Manufacturing companies outsources most of its functions like finances, design and other little services to focus on its core competencies and all this in turn increases activities within the service industry and the employment figures reducing its manufacturing counterpart in correspondence. The rise of services is due also to changing economies within the EU, limited competitiveness of traditional industrial production. Financial Times. (2009) AEROSPACE INDUSTRY IN BRITAIN The UK aerospace industry (UKAI) remains one of the most successful sectors of UK manufacturing. In 2003, the UKAI accounted for 0. 6 percent of UK gross value added (GVA) and four percent of value added by the UK’s manufacturing industry as a whole. The UKAI is also one of the UK’s major export sectors, generating a trade surplus of just over ? 2. 5 billion in 2003, compared with manufacturing overall, which had a trade deficit. The UKAI provides direct and indirect employment in the UK for around 255,000 people. Although productivity levels in the UKAI are generally higher than the UK average, they Remain disappointing when compared to the industry’s main international competitors. However, there are signs that UKAI productivity growth is beginning to outpace these competitors. There are also evidences to suggest that there will be a further challenge for The UKAI as competition from emerging economies is growing. The growth of the United Kingdom aerospace industry illustrates the changing trends in globalisation, industrialisation and service delivery. From a virtually non-existent sector around a century ago, the UKAI has grown so much in the last twenty years and captured about 10% of the world market in aerospace and accounted for just over 4% of UK anufactured output and directly contributed just over ? 5. 5 billion to UK gross value added (GVA)1 in 2002. In 2003, the UKAI directly employed just fewer than 122,000 people, 0. 4% of total UK employment and 3% of total manufacturing employment. An additional 150,000 people have been estimated to be indirectly employed by the industry. UKAI productivity was ? 54,000 per head in 2001, 50% higher than the UK average and 35 percent higher than for manufacturing as a whole. http://www. publications. parliament. uk/pa/cm200405/cmselect/cmtrdind/151/151. df accessed 27th November 2009. ANALYSIS OF THE MANUFACTURING AND SERVICE SECTORS A steady growth rate has been recorded in the service industry while the contribution to the overall GDP from the manufacturing industry has witnessed a steady decline in the last few decades. This has been well documented from various researches carried out but a serious questions still arises from the performance of the service sector and its long term sustainability and effect on the economy. David Liston asked â€Å"what will the services industry be servicing if there is no hardware? The first priority should be to stop treating manufacturing as a relic of the industrial revolution. High-value-added manufacturing brings huge benefits. It penetrates the economy of the entire country, not just London and the south-east. It pays well but avoids bewildering distortions of income. It drives and enables a broad range of skills and stimulates the growth of services. In short, it creates wealth. Curmen P et. al (1997) The UK manufacturing sector continues to decline and the subsequent loss of exports has not been replaced by revenue from the service sector as the government had originally thought. At the same time, the ownership of UK companies by foreigners is increasing and UK companies are continuing to relocate some of their labour intensive operations to low cost economies. The cost of compensating employees who are made redundant when a company in the UK closes is one of the lowest in the European Union. So for multi-national companies with surplus capacity, the UK factories may be selected for closure. There is also a tendency for companies to consolidate research and development in their home country with the consequence that it is lost from the UK. This decline in manufacturing was triggered by some factors: ?Changes in manufacturing and materials technology and consumption patterns which affected a lot of steel, coal ship-building and power generation industries. ?Obsolete and redundant plants and inadequate investment and financial assistance to replace them. ?Diverse and intense competition from low wage nations and newly industrialised economies. ?Resistance to change at all levels of production from management to trade unions. Adverse effect of Government policies both fiscal and monetary on industries. Particularly in high interest rates and fluctuating exchange rates. With David Liston’s question in mind and the fact that service industry has not been able to replace manufacturing industries effectively producing a cushioning effect for the drop in its GDP contribution slump which is evident by the facts below: ? The interdependence on manufacturing industry as shown in the case of the aerospace, further reduction in manufacturing output will adversely affect services output also. Technical progress in manufacturing offers greater prospects of high-wage jobs able to raise standards compared to part-time low wage in the services industry. ?For each 1% decline in export of Britain’s manufacture, an excess of 2. 5% rise in export in required in services to complement the effect. Some policies which cut across all concerned parties from Government to private market solutions have been formulated to help halt the decline in manufacturing. Some of which include: ? Britain’s macroeconomic and industrial policy Improved management in the industrial sector ?A reform of Britain’s institutions ?Greater accumulation of both human and physical capital ?Improved innovation to accommodate mechanisation http://web. ebscohost. com/ehost/pdf? vid=5hid=9sid=537cf987-eae7-4a54-a771-43527c911 1f7@sessionmgr10 accessed on 1st of December 2009. CONCLUSION Divergent analysis from various stakeholders shows the variable effect of manufacturing and service delivery on the national income of Britain. A steady decline in manufacturing was evident and it coincided with the boom How to cite Service Industry vs Manufacturing Industry in the UK, Papers

Saturday, December 7, 2019

Analysis of Human Comfort free essay sample

In a building the human comfort is affected by the built-up environment and its design, the lighting, the temperature and the sound levels. If one of these aspects is permanently higher or lower than its acceptable value, the people might not be able to work to the best of their abilities or concentrate in this room. I will analysis and explain the aspects of human comfort with the example of one separate office room where drawing/design work is done.The correct lighting is an important part to ensure human comfort. A specific lighting level must be provided keep the eyes healthy and make sure the person can stay concentrated. Too bright light can harm the eyes over time. The workers wouldnt see well and therefore have a bad orientation in the room, especially reflecting surfaces would irritate them. Constantly staring into, but also being surrounded by, too bright light can cause partial, or even permanent blindness. However, too low light neither has good effects on the workers eyes. The low light level would cause constant straining on ones eyes and make seeing more difficult. This may affect the persons vision badly. Furthermore, workers should always make sure that their computer or phone screen is not brighter than the environment around them, because this is harmful for their eyes as well. Most modern devices offer an Night-Mode, which filters the blue-lights so it can be used in darker environments with less bad effect on the eyes. Together with Adaptive-Brightness, which adjust the screens brightness to the light level in the surrounding area, people dont have to worry about affecting their vision through bad screen lighting. During the day, the day light should be used to create a natural feeling for the workers. The lights used shouldnt be some that produce perceptible heat. Too extreme temperatures may have bad effects on people. Psychological stress can be caused and could make a person more prone to some illnesses. Quick and many temperature changes can affect the ability to work properly. Good ventilation systems should be installed to constantly refresh the air in order to prevent condensation. Condensation arises when water vapour comes in contact with a colder solid surface, which happens at too high temperature. This can cause deterioration of materials or encouraged fungi growth, which increases the heat loss and rises health issue risks. To decrease humidity, the air needs to be refreshed, the temperature shouldnt be changed to much and be lowered, so the water cant vaporize anymore and plants should be removed. To let in some fresh air, the window can be opened for a short time, this will help the concentration of the workers. But of course, the temperature should not be set too low. This would cause shivering and lowers the concentration. To provide a good working experience, a not too cold and not too warm temperature level should retain.In the office it should be fairly silent. It is more comfortable, helps staying concentrated and therefore increases the productivity, and is healthy. All the walls and floors should be extremely good soundproofed, so the workers wont hear things happening in the rooms next to them, above or underneath them. Being constantly in a loud area can harm ones ears and may cause partly or permanent deaf, and can heavily stress someone. Workers should be able to focus on the sound coming from their room.What is also important for human comfort, is the overall design of the room. Of course, design is a matter of taste, but there are some general things which are required for optimal comfort and wellness. The most important here is the room size. A too small room can cause stress or in worst case even depressions, the same applies for the ceilings height. There should be at least one big and tiltable window to be able to let some fresh air in. Ideally there is also a glass wall in order to use the sunlight to brighten up the room during the day. Electrical jalousies could be installed, to let them down if the sunlight dazzles or it has become to hot in the room; they can also be tilted so the room is still exposed. The desk should be placed with the workers weak-hand-side to the glass wall so the daylight can be used when something is written/drawn on paper, otherwise the hand would shadow the sheet which would harm the eyes over time and errors occur easier in the drawings. The computer screen or laptop wouldnt be placed directly next to the glass wall, because the sunlight may warm up the computer too much. The colors of the furniture should be matt and not reflecting. However, at night one would see reflections on glass walls and windows, which could irritate, but curtains could solve the problems. Of course, then the artificial lights would be used. They should be fairly white LEDs mainly exposing the desk (but still the hole room) and not toned too warm or cold, neither have any other colors. Colored light would distract and make things like reading or seeing specific colors difficult. For the walls, bright colors should be used because they, make the room seem bigger, which provides comfort. There shouldnt be any plants in the office. Although they may look beautiful, they can cause condensation. Instead, a good fan can be placed, which can help preventing humidity. Although, a fan isnt necessarily needed when the ventilation is good. The worker ideally would sit with the back facing a wall (with still a bit space behind) and with sight to the entrance. Psychological spoken, subconsciously this makes a person feel safer in case of an attack, because there is more time to react. The same applies to general living. For example, in a bed room one should sleep with the feet nearer the entrance. For safety, smoke detectors need to be installed and in case of an emergency there must be an easy and fast way out of the hole building, lighted if there is a power breakdown.These are things that should be standard for best comfort and wellness. These things are definitely not vitally important, essential or easily affordable, but comfort has always been kind of luxury. Of course, all things count for apartments and houses as well. Although, some things obviously would differ in other rooms. For example, you wouldnt need such big windows and glass walls in a music-studio, there would be normal, good soundproofed walls, because noise in a music-studio is a more important aspect than light. But without the big glassed walls, the warmth of the sun light shining in during the day would go lost. Therefore, one probably would set the temperature in the room slightly higher.

Saturday, November 30, 2019

World Religions an Example by

World Religions Since the prehistoric era, religion has been in this world. The foremost indication of this religion was through the Homo sapiens neanderthalensis (Molloy) which existed 100, 000 years ago. Every now and then, religion persists to be an exceedingly leading facet of human lives. In this contemporary period, lots of crises and challenges are experienced by humans from all feasible conditions, setting and social category. Day by day, everyone ought to endure matters of fitness, security and transience. And due to these every day concerns that religion persists to exist. As a fact, religion is being held as the general instrument for elaborating things which human beings do not comprehend using the context of the recognized material world. Need essay sample on "World Religions" topic? We will write a custom essay sample specifically for you Proceed Even though there are immeasurable religions, each unique from the other, they all provide the similar function. All of them provide answers for the questions which mankind appear to be automatic to inquire: Why we exist? How shall we manage our lives? What is there after life or is there really an after life? Religion makes it possible for us to convey our values and standards from one generation to another, and affects the means we act together with the natural world (Matthews). It educates us how to distinguish ourselves in light of all the creations and gives rationale and significance to life. Among the countless religions across the world, Christianity, Islam, Hinduism, and Buddhism are the leading religions of the world. Approximately, there are 2.1 billion adherents of the Christian faith, 1.5 billion for Islam, 900 million for Hinduism, and 376 million for Buddhism (Esposito s population is not a member of any established religious group. The eighty-four percent of the worlds population is affiliated with various religions which imply that most people from across the globe employ the teachings of the traditions set by the religious groups that they are in as their guide in living their lives. This means that the values and beliefs that they have are mainly influenced by their religions such that whatever their actions or behaviors or way of arriving at decisions could really be traced from their religions. If this is so, then religion could really govern the entire human activity. Though it seems that religions could be the over-all author of mankinds everyday dealings, religion has been the subject of debates and disputes. The diversity of religions in the world makes it too hard for everyone to just simply go with the course of life. While particular religions describe how life must be realized, others tell otherwise. And there the clash begins. From the ancient period, major conflicts were identified with and attributed to the variety of religions and the contrasting beliefs and traditions that they had. The holocaust was surely among the most identified example of religious war (Matthews). And so are the other wars that occurred in the history of the world. The most simple justification of those wars was based on the idea that the proponents of those wars were just doing what they ought to do in order to uphold their religious traditions and standards. And efforts or means to prevent them from doing such would mean suppressing their freedom to promote their religious inclinations. This was surely a mistaken assumption held by the advocates of each religion who were part of the aforementioned conflicts. But was there any way to prevent the happening of those wars without imposing restraining orders concerning their religious practices and traditions? Definitely, there were no means established then which led to hostilities and severe misunderstandings. So much for the ill-results motivated by the existence of various religions in the world, could one boldly assert that religions are nothing but institutions made to cause divergence and disagreement? Could one claim that the world is better off without religions? This is another interesting argument against religions. The abolition or the maintenance of world religions would ignite another war (Esposito & Fasching). This time it is not among religions but between those who believe that religion is still geared towards the greater good and those who suppose that the eradication of all the established religions in the world would help resolve the conflicts of the world. While the Christians believe in God and the salvation of the souls, the Muslims promote the teachings of Allah and the doctrines written in Quran, the Hindus continue to seek for that which gives peace to mind, and the Buddhists try to maintain the teachings of Siddhartha Gautama, their quests and purposes are directed towards one goal that is to obtain the good life (Molloy). In this time of globalization, it is expected that everyone will be acquainted and exposed to different kinds of people as well as various settings. Being open with the different religious beliefs and standards is really one of the best way to understand not only the reason why other people live their live their way, but also to realize ones own cause in this world. Works Cited Esposito, John L. and Fasching, Darrell J. World Religions Today. Second ed. Oxford University Press, 2005. Matthews, Warren. World Religions. Fifth ed. Wadsworth Publishing, 2006. Molloy, Michael. Experiencing the Worlds Religions. Fourth ed. McGraw-Hill Humanities/Social Sciences/Languages, 2006.

Tuesday, November 26, 2019

Organizational Quality Improvement Plan

Organizational Quality Improvement Plan Free Online Research Papers Executive Summary Health care is an imperative service that touches the lives of millions of Americans on a daily basis at considerable and susceptible times from birth to death. In recent decades, knowledge and skills, pharmaceuticals, and proficiency have significantly enhanced how care is delivered and the projection for recovery. American markets for innovation in pharmaceuticals and medical devices are the best in the world. The miracles of recent medicine have become more or less routine. The healthcare that is provided within the United States is the best in the world. Despite these amazing achievements, the cost, quality, and convenience of American health care have become major governmental and procedure issues. Health care quality varies extensively, even after calculating for cost, source of payment, and patient preferences. A lot of Americans find themselves without health insurance coverage at some point during any given year. The expenses of providing uncompensated care are a large burden for many health care providers, other Americans, and tax payers. Hospitals across the Country are always searching for ways to improve their quality of care and promote effective quality improvement strategies. The findings of this quality improvement plan will offer guidance and steps for Memorial Healthcare System move in the right direction. To promote greater use of practices and policies that enhance quality in their facilities, this plan identifies and describes the key ingredients to the success of their organization. This plan examines the issues that are made with dispensing medication to patients. Imperfections in the health care system have impeded the competition from reaching its full potential. This plan will discuss the current procedures that are in place for dispensing medication to the patients, what can be done to improve this issue and how it can increase the patients care and satisfaction. Introduction/Purpose Memorial Healthcare System has been servicing the South Florida residents for the past 55 years. It is the fifth-largest public healthcare system in the nation and is highly regarded for its exceptional patient and family centered care (mhs.net). Their organization has been recognized as a national leader in quality care. They have several facilities located in Broward County that offers extensive and diverse services that include Memorial Cardiac and Vascular Institute, Memorial Cancer Institute and Memorial Neuroscience Center (mhs.net). The organization also provides a comprehensive array of pediatric services and is the leading children’s hospital (Joe DiMaggio Childrens Hospital) in Broward and Palm Beach Counties (mhs.net). Their mission statement provides safe, quality, cost-effective, patient and family centered care, regardless of one’s ability to pay, with the goal of improving the health of the community it serves (mhs.net). The organization’s vision is to improve the health of the community by becoming a world-class model of safety, quality, serve and efficiency (mhs.net). Goals/Objectives Memorial Healthcare System is dedicated to surpassing customer expectations by applying a Patient First philosophy to all aspects of its operations. Every decision is based on the best interest of patients and their families. Through excellence in safety, quality and service, they strive to ensure that their patients and families receive the care, information, access, collaboration and support they need (mhs.net). They are committed to treating their patients and families with compassion, dignity and respect. With this commitment they are dedicated to improving the health, well-being and, most of all, quality of life to all of their patients. The organizations values are focused on improving their patients care one step at a time and by providing extraordinary patient care. All employees who work with Memorial Healthcare System is responsible for helping provide superior patient care. They have set high standards and consistently challenge them to provide the highest levels of safety, quality and service at all times (mhs.net). Scope/Description/QI Activities To continue achieving the goal of providing high quality of care to all patients, Memorial Healthcare Systems believes that all of their employees need to be part of the quality improvement plan to reduce/eliminate the errors currently being found when dispensing medication to their patients. All of their employees will be given a Quality Improvement Program that will describe their responsibilities. The Quality Improvement Program will include a number of activities which include: Seminars on all patient services that affect patient health and safety Medication therapy and medication error prevention Patient, staff and physician surveys National Patient Safety Goals Medical Record Reviews The organization will have a Quality Improvement Committee that will oversee the implementation of this quality improvement plan. The committee will consist of the CEO, the Chief of Staff, the Director of Nursing, the QI Manager, the head Pharmacist from each facility, Infection Control nurse, Utilization Manager, a representative from the organization’s Board of Directors, one physician and one nurse from each of the following departments: Bariatric/Weight-Loss Surgery Behavioral Health Center Cancer Institute Cardiac Vascular Institute Diabetes Centers Family Birthplace Fitness Rehabilitation Centers Geriatric Care Program Home Health Services Lymphedema Program Neuroscience Center Outpatient Services Pediatrics Pediatric Cancer Pediatric Cardiac Center Pediatric Cleft Craniofacial Center Pediatric Cystic Fibrosis and Pulmonary Center Pediatric Endocrinology Pediatric Neonatal ICU Pediatric Neuroscience Pediatric Nephrology and Hypertension Pediatric Orthopedics Robotic Institute Sickle Cell Sleep Study Program Spine Center Womens Services (mhs.net). The members of this Quality Improvement Committee will have many responsibilities which will consist of: Assuring that the functions of this plan are completed Prioritizing issues referred to them for review Ensuring that the data that they receive are analyzed, recommendations made, and follow up is completed Incorporating internal and external sources of benchmarking data utilizing (COMS) Clinical Outcome Measurement System, and JACHO’s National Patient Safety Goals. Identifying any other resources they see fit for the incorporation into the organizations overall quality improvement efforts. Reporting on findings, studies, recommendations, and trends to the Governing Board quarterly and annually; reporting to the QI Committee and Medical Staff monthly; and reporting all of the employees when appropriate. Identifying any educational needs and assuring that staff education for quality takes place. Appointing sub committees or teams to work on specific issues as necessary Coordinating activities for all of the employees within the Memorial Healthcare System (nhanet.org). Data Collection Tools The ability to develop, test, and implement changes is essential for any individual, group, or organization that wants to continuously improve (IHI.org). Memorial Healthcare System will use flowcharts to draw a picture of the processes they currently have for their medication dispensing and for their patient medical documentation. By using a detailed flowchart it will allow the organization to identify rework loops and complexity in a process. Using a flowchart will help them to identify and clarify any complex processes they might have, identify steps that do not add value to the internal or external customer, including: delays; needless storage and transportation; unnecessary work, duplication, and added expense; breakdowns in communication (IHI.org). It will also provide team members a shared understanding of the process and use this knowledge to collect data, identify problems, focus discussions and identify resources (IHI.org). Using the flowchart will also provide the basics needed to creating their new processes that need to be put in place. The organization will also use the cause and effect diagram to help them with displaying the possible causes as to why their current system isnt working. It will show possible problems within each step of their current process. By using this tool, Memorial Healthcare System will be able to graphically display the relationship between the causes to the effect and to each other. They will be able to see how each problem is linked to each other and identify areas that need to be improved. Another tool that will be used is the Pareto Diagram. This diagram is a type of bar chart in which the various factors that contribute to an overall effect are arranged in order according to the magnitude of their effect (IHI.org). By using this tool Memorial Healthcare System can visualize the different areas within each of their QI initiatives that will have the greatest impact on their success. It will allow the organization to focus on the different parts of each initiative that needs the most attention and the rationale for focusing on these areas. QI Processes and Methodology Customer-Inspired Quality (CIQ) is the methodology that will be used to focus on this organizations performance improvement area. It is best suited for success in the healthcare industry because it defines all patient care and administrative processes and it is hospital/service organization friendly and understandable by all stakeholders which encourages a broad cross section of staff input and involvement. Its administrative and quality measures are implemented to monitor work process changes, and, takes quality methods used in manufacturing and adapts them into the healthcare industry that can provide successful short and long-term improvements in quality, safety, and customer satisfaction (Moyer, H., New, W., Shaw, J.G., 2004). Memorial Healthcare Systems will use Electronic health records known as EHR which can reduce several types of errors, including those related to prescription drugs, to preventive care, and to tests and procedures (Carter, J.H., 2004). This software can provide automatic drug-drug/drug-food interaction checks and allergy checks, standard drug dosages and patient education information. Alerts can remind clinicians of intervals for preventive care and track referrals and test results. This software has demonstrated benefits during the process of treating patients. The staff will electronically document the medications being given to the patients by using the Barcode Technology, (mhs.net). Before delivering each medication, the medication’s bar code and patient’s identification bracelet are both scanned. Computerizing this process alerts healthcare providers to possible drug allergies and potential risks, and helps to ensure what is known in the healthcare industry as â€Å"The Five Rights of Medication Administration (mhs.net). These rights include the right patient, right drug, right dose, right route of administration and right frequency (mhs.net). The organization will also use Computerized Physician Order Entry (CPOE). This can reduce total medication error rates by 80% and adverse errors by 55% (Bates, D.W. MD, et al. 1998). Computerized Physician Order Entry (CPOE) allows physicians to enter orders for treatment, tests and consultations directly into computer software that captures and transmits the information. This helps prevent medical errors that occur from verbal or handwritten orders that are inaccurate or hard to read. Successful use of CPOE leads to safer, more efficient, higher-quality care. Comparative Databases, Benchmarks, and Professional Practice Standards Memorial Healthcare will use comparative databases to integrate a process for constant evaluation with similar organizations, values and best practices. Constantly implementing leading-edge initiatives will assist the organization with providing the best care to their patients. It is extremely important that the organization continues to benchmark local hospitals and facilities within the Broward and Palm Beach Counties of Florida so that they will be able to continue being one of the nation’s best medical facilities. Authority/Structure/Organization The Governing Board of Memorial Healthcare System maintains ultimate authority and responsibility for the quality of care received by their patients and will oversee the development and implementation of this QI plan. The CEO is employed directly under the Governing Board and will be in charge of ensuring that the QI plan maintains a meaningful and effective quality improvement program. The Medical Director in conjunction with the Quality Improvement Committee will be responsible for the direction and management of all the QI activities. The Medical Director will report directly to the Governing Board on any medical issues and to the CEO for any administrative issues. The Quality Improvement Committee’s main function will be to oversee the medical and operational systems as they affect the patients and the employees. Every department within the Memorial Healthcare System will be responsible for ensuring that all quality improvement activities are taken place with every employee. All of the quality improvement initiatives must be conducted as a part of the organizations Quality Improvement Committee activities (nhanet.org). Every manager within each department will be responsible for identifying quality indicators, collecting and analyzing data, developing and implementing the changes to improve the care that is being provided to the patients when medication is dispensed. This will also include monitoring their employees to ensure that improvement is made and sustained. Communication The Quality Improvement Committee provides oversight and functions as the central clearing house for the quality data and information collected throughout the Memorial Healthcare System. This committee will track, trend, and aggregate the data received, create reports and communicate the findings to the Governing Board. The Governing Board will then communicate the findings to all of the appropriate staff members. Education The entire staff population within the Memorial Healthcare System will be responsible for attending all activities implemented for the quality improvement plan. Each employee will receive education regarding this plan during an initial orientation and on an annually basis thereafter. Any new developments or changes that might arise, each employee will receive updated documents for educational purposes. The material received will include a description of the QI plan and how their ownership fits into the plan depending on their job responsibilities. Annual Evaluation This Quality Improvement Plan will be evaluated on an annual basis for effectiveness in achieving the organizations goal of assuring that the best quality of care is being provided to all of their patients. A summary of all activities taken place, improvements that are made, the modification of care delivered, projects that are in process, and any change recommendations for this QI plan will be compiled and forwarded to the board for action to be taken. References: Bates, D.W. MD, et al. (1998). Effect of Computerized Physician Order Entry and a Team Intervention on Prevention of Serious Medication Errors. JAMA 280: 1311-1316. doi:10.001/jama.280.15.1311. Retrieved on December 20, 2009 from http://jama.ama-assn.org/cgi/content/abstract/280/15/1311 Memorial Healthcare System Services (2009). About Us. Retrieved online on December 20, 2009 from http://mhs.net/aboutus/aboutus.aspx Memorial Healthcare System Services (2009). Commitment to Patients First. Retrieved online on December 20, 2009 from mhs.net/aboutus/patientfirst.aspx Memorial Healthcare System Services (2009). Our Mission, Our Vision. Retrieved online on December 20, 2009 from mhs.net/aboutus/MissionandVision.aspx Model Quality Improvement Plan (2009). Retrieved online on December 20, 2009 from nhanet.org/pdf/quality/model.qi.pdf Moyers, H., New,W., Shaw, J.G (2004). Choosing a Quality/Performance Improvement Methodology. Shaw Resources. Retrieved on December 7, 2009 from https://www.shawresources.com The Institute for Healthcare Improvement. (2009). Tools. Retrieved online on December 20, 2009 from ihi.org/IHI/Topics/Improvement/ImprovementMethods/Tools Strategic Technologies Inc. (2004). Improvement Approaches Comparison Table. Retrieved on December 20, 2009 from https://www.strategictechnologiesinc.com Research Papers on Organizational Quality Improvement PlanArguments for Physician-Assisted Suicide (PAS)Marketing of Lifeboy Soap A Unilever ProductThe Effects of Illegal ImmigrationInfluences of Socio-Economic Status of Married MalesTwilight of the UAWThe Fifth HorsemanThe Project Managment Office SystemAnalysis of Ebay Expanding into AsiaRiordan Manufacturing Production PlanOpen Architechture a white paper